Eightech Tectron is for Vacuum, N2 and Air Reflow Equipment

Characteristics

□ Significantly decreased the void

• With combine the solder, the void space can be saved maximum less than 1%.
• Improved the electrical characteristics and the connection reliability of the product.
□ In-line type for mass production

• Min. 30 sec tact speed time for mass productions.
□ Convection heating system

• One time soldering and vacuum reflow on the double face PCB, the void can be decreased.
• The metal PCB with the heat sink of aluminum can be solder.
• The temperature variations less than the hot plate heating system, the reflow time can be shorten.
□ Ultra low power consumption to promote saving energy.

• 　
□ Large-capacity flux collection unit to increase operation hours

• The cleaning flux frequency several times a year.162 model is excellent collection performance.
□ This equipment can use for N2 Reflow Equipment.

Main-Characteristics

□ Vacuum effect.1

• In combination N2 circulation heating with vacuum system, the void occurrence is made to reduce drastically even the wide-area soldering.
  In possible less than 1% of the void by combine the solder paste.
  

□ Vacuum effect.2

• Self alignment effect is great, positioning of parts is expected to reduce abnormality and floating defects.
  Good solder fillet is form, visual inspection of fillet become easy.
  

□ Performance of heating and vacuum processing

• With combine the convection heating system and the vacuum, soldering quality beyond the concept of the conventional temperature profile conditions is possible by small zone.
  Made a small vacuum chamber to able to min 30 sec tact speed time for mass productions.
  Possible to vacuum soldering of small parts for low heat resistance. RSV Series can be solder the thick plate of copper or aluminum.

□ High heat-insulation designed

• Used low thermal conductivity material.
  Combine the double heat-insulation material, resinification of cover for insulation material and lower the power substantially, can save energy consumption and CO2.
  

□ Flux collection unit and filter unit

• The large-capacity flux collection unit makes less cleaning frequency. Also it is easy to handle replacing and cleaning radiators.
  162 model is World's best flux collection efficiency by New circulation flow that collects flux in most efficiently way.
  The multistage special filter can be protected from the dirt of the vacuum pump. It is easy cleaning filter.

Specifications

Model No.		RNV152M / RSV152M / RNV162M
		-512-WD	-512-LE	-612-WD	-612-LE
Heating Zone		5		6
Vacuum Zone		1
Cooling Zone		2
Power		AC200V　3Φ
Start up Power		Max. 36.0kW (39.5kW)		Max. 43.0kW (46.8kW)
Normal Power		Approx. 8.0kW (Approx. 12.5kW)		Approx. 10.0kW (Approx. 14.7kW)
Heating Temperature		RNV：Max 280℃　RSV：Max 350℃
Vacuum		1 ～ 12kPa
N2 Consumption		Approx. 24m3/h	Approx. 18 ～ 24m3/h	Approx. 24m3/h	Approx. 18 ～ 24m3/h
Dimension	Length	5,406mm (5,151mm)	5,871mm (5,951mm)	5,741mm (5,486mm)	6,286mm (6,366mm)
	Width	1,350mm (1,510mm)
	Height	1,500mm
PCB	Width	100 ～ 330mm	100 ～ 250mm	100 ～ 330mm	100 ～ 250mm
	Length	100 ～ 250mm	100 ～ 330mm	100 ～ 250mm	100 ～ 330mm
Component Height		Upper:30mm　Lower:30mm (from chain top)
Flux Collection		Standard Equipment：Large-capacity flux collection unit by air-cooled. 　　　　　　　　　　　　　（Large-capacity flux collection unit by water-cooled.）

　　　　　　　　　　　　※（　）is for RNV162M model