Supporting Conveyor to prevent the PCB from warping down by reflow-heat.
- The position of the chain that supported by the PCB can be set up manually by the handle. When Anti-warp rail is not used, it can put under the fixed rail.
- The position that registered in the PCB pro-gram can adjusted the width degree of the conveyor and movement at the same time.
Supporting Unit to make the PCB, particularly small size one, smoothly to transport-in and out with another machine. It is equipped at entrance and exit of the reflow machine.
Conveyor Unit to transport the PCB in 2 lines.
Center Side : Fixed Rail
Both Side : Movement Rail
Same conveyor's width, speed adjustment.
Center Side : Movement Rail
Both Sides : Fixed Rail
The conveyor's width and the speed of the 2 rails can be adjusted individually.
Conveyor Unit to transport the PCB that are long size one and the different size PCB in one lot.
Timer to start the reflow-operation at advanced setting. It works for reducing the preparation loss time.
- ・It's easy to set the operation-start time, including public holidays, for two months.
・The start-up time can be set two in one day such as two shift operation.
・Holiday-setting and the start-up time setting can be made in a time.